Plastic Accessories
- Offers stable support to reinforcement steel in ground floor slabs and its large base area helps stability and prevents puncturing of polythene film.
- The clip-on version facilitates can be used in vertical and horizontal applications.
- Big saving on labour and time cost as it can substitute concrete spacer.
- Each spacer has dual cover.
| Product Code (PA_RPMS) | Cover (mm) | Bar Size (mm) | Std. Packing (Pcs / Bag) |
|---|---|---|---|
| 4050 | 40 / 50 | 04 – 16 | 200 |
| 5065 | 50 / 65 | 04 – 16 | 200 |
| 7590 | 75 / 90 | 06 – 20 | 200 |
| 90100 | 90 / 100 | 06 – 20 | 200 |
Heavy Duty Chair (With Clips)
- It is designed specifically for bar.
- It provides minimal exposure at the concrete surface and is suitable for different bar sizes.
- The clips themselves provide sufficient stability without the need to tie the bar with steel wire.
| Product Code (PA_HDC) | Cover (mm) | Bar Size (mm) | Std. Packing (Pcs / Bag) |
|---|---|---|---|
| 200913 | 20 | 09 – 13 | 1000 |
| 250913 | 25 | 09 – 13 | 1000 |
| 450913 | 45 | 10 – 12 | 300 |
| 1100810 | 110 | 08 – 10 | 150 |
* Sizes from 20mm – 110mm are available (may enquire for sizes you want)
Plastic Wheel Spacer
- Used for on-site and pre-cast yards for support in columns, beams, wall and pre-cast piles.
- Its design allows concrete to flow through the spacer.
- Its design allows it to be used in horizontal and vertical applications.
- It maintains the integrity and uniformity of concrete.
| Product Code (PA_PWS) | Cover (mm) | Bar Size (mm) | Std. Packing (Pcs / Bag) |
|---|---|---|---|
| 150812 | 15 | 08 – 12 | 1500 |
| 250810 | 25 | 08 – 10 | 1000 |
| 401013 | 40 | 10 – 13 | 350 |
| 500814 | 50 | 08 – 14 | 200 |
* Sizes from 15mm – 75mm are available (may enquire for sizes you want)
Half Wheel Spacer
- Specially designed for RC Pile users.
- It provides both height and cover and feet increase for land capacity and prevent tipping.
Mesh Spacer
- Specially designed for the support of wire mesh or steel bar for slabs on site and in pre-cast yard.
- Used to support the first layer of wire mesh where two layers of reinforcement are required in concrete slabs.
- It is left in place prior to the final concrete pour and becomes a permanent part of the structure.
Wall Retaining Spacer
- It holds two layers of reinforcement between two forms.
- It also acts as a wall thickness guidance.
- No previous u-hooks to bend, no tying and no separate spacers required.
- Time-saving as it only needs to clip onto the reinforcing bar.
* Sizes form 100mm – 300mm are available (may enquire for sizes you want)
Plastic Sleeving Cone
- Used at the end of the PVC sleeve.
- Can be easily extracted after removal of the formwork to form a chamfered recess for subsequent grouting.
- For tie rod and plastic pipe sleeve protection used in concreting formwork.
